top of page
lathe brush.JPG

EVERTHING IS NEW, I am a TAIG DEALER                                                                            $599 with shipping 

Shipping to PR AK And HI will be extra

You need to mount and bolt this lathe to board, bench or piece of sheet aluminum

The taig Micro Lathe II features an upgraded 550watt brushless motor (.73hp) 0-9000 rpm max

The controller has a 0-4500 rpm read out which displays Realtime speed and a remote speed control 

Speed can also be set at controller 

It has a 1 to 2 pulley ratio, so you multiple the readout x2

The lathe includes all items pictured, except my oak floor

The lathe comes in 120v or 220v with American Style 3 prong plug so euro buyers will need a plug adapter

SPECIFICATIONS

GENERAL

  • Overall working accuracy 0.0005 in.

  • Max. headstock normality to bed 0.0004 in.

  • Max. taper bed dovetails over pins 0.0001 in.

  • Cross slide screw 1/4 - 20

  • Variable speed 0- 9000 RPM

  • Length of headstock on ways 2.625 in.

  • Width of cross slide on carriage 2.000 in.

  • Maximum bearing runout 0.0004 in.

  • Max.cross slide normality to bed 0.0004 in.

  • Cross slide dial graduation 0.001 in.

  • Carriage travel 0.600 in. per 1 rev. of handwheel.

  • Pulley type cogged tooth

  • Length of carriage on ways 3.000 in.

  • Bed dovetails 45 deg.

  • Brushless Spindle Motor 550watt

CAPACITY

  • Max. turning dia. 4.5 in. (extendable to 6.5 in.)

  • Swing over cross slide 2.375 in.

  • Overall length of bed 15.5 in.

  • Overall length of lathe 16.5 in.

  • Tool bit size standard 1/4 in.

  • Drill chuck capacity 1/4 in.

  • Distance between centers 9.75 in. (with tailstock).

  • Carriage travel 9.0 in.

  • Cross slide travel 1.75 in.

SPINDLE

  • Sealed precision ball bearing

  • Bearing OD 1.5748 in., ID 0.6692 in.

  • Spindle nose 3/4 in. - 16 (3/4 in. SAE)

  • Spindle hole 0.343 in.

  • Spindle ID taper 15 deg (30 deg included)

  • Max. collet diameter 9/32 in.

  • Pulley size 5/8 inch bore.

bottom of page