HomeCNC MillOptionsSteppersSoftwareVideosLinksTutorialContact

 

                                                          Have you ever wanted a cnc lathe that would allow you to switch from manual to cnc?

A cnc lathe that could be used occasionally or as a dedicated  production cnc lathe?

 cnc converted cross slide  $250 for cnc carriage only (no motors, lathe or controller)

Lathe and cnc cross slide $650
Complete cnc lathe with 4 axis controller $1000
 

Description

 
SPECIFICATIONS
  • Overall working accuracy 0.0005 in.
  • Max. headstock normality to bed 0.0004 in.
  • Max. taper bed dovetails over pins 0.0001 in.
  • Cross slide screw 1/4 - 20
  • Max. spindle speed recommended 7000 RPM
  • Length of headstock on ways 2.625 in.
  • Width of cross slide on carriage 2.000 in.
  • Maximum bearing runout 0.0004 in.
  • Max.cross slide normality to bed 0.0004 in.
  • Pulley type std. 5/8 in. bore multi-stop vee belt.
  • Length of carriage on ways 3.000 in.
  • Bed dovetails 45 deg.

CAPACITY

  • Max. turning dia. 4.5 in. (extendable to 6.5 in.)
  • Swing over cross slide 2.375 in.
  • Overall length of bed 15.5 in.
  • Overall length of lathe 16.5 in.
  • Tool bit size standard 1/4 in.
  • Drill chuck capacity 1/4 in.
  • Distance between centers 9.75 in. (with tailstock).
  • Carriage travel 9.0 in.
  • Cross slide travel 1.75 in.

SPINDLE

  • Sealed precision ball bearing
  • Bearing OD 1.5748 in., ID 0.6692 in.
  • Spindle nose 3/4 in. - 16 (3/4 in. SAE)
  • Spindle hole 0.343 in.
  • Spindle ID taper 15 deg (30 deg included)
  • Max. collect diameter 9/32 in.
  • Pulley size 5/8 inch bore.
 

Prototype Picture