Click to go back to cnc mill

Sherline Taig comparison

The taig mill is on the left                                                       The sherline mill on the right

Heavily braced z column bolted to 1/2 of steel

welded to a 2" square steel tubing

 

Minimized flexing and vibration=minimal chatter

Unsupported z column, no bracing, like a goose neck swaying in the wind

Flexing and vibration=chatter

1/2 taig lead screw, massive square rails with bronze gibb on left

1/4 sherline lead screw, dove tails and interesting plastic gibb..........looks cute

100% duty taig motor on left 20% duty sherline motor on right